CONTRACTOR SAW

The SawStop® 110V, 1.75HP 10" Professional Contractor Saw is engineered to fit the unique demands of the avid hobbyist in a home setting. Delivering the peerless fit and finish of the Professional Cabinet Saw, this saw's 110V power and optimized footprint make it ideal for the many challenges of a home shop. With SawStop's® legendary safety system, uncompromising quality and industry-leading dust collection, the 110V Professional Contractor Saw is engineered to be the cornerstone of a home shop.
CNS175-SFA30
CNS175-TGP52
CNS175-TGP36
MC-CNS
Wurth Part #
CNS*******

Offers versatility and safety. Whether on the job site or in the shop, it delivers the performance you need with the peace of mind only SawStop’s patended safety system can provide. The 1.75hp Contractor Saw offers multiple mobile base options.


Choose from 30”, 36” or 52” rip capacities.

Overview

  • SawStop Safety Brake: Brings the blade to a halt almost instantly on contact with skin

  • One-Turn Blade Elevation: Other saws require over 25 turns to raise or lower the blade—with the Jobsite Saw, it's accomplished with a single turn!

  • Quick-Tilt Blade Angle: Tilt the blade quickly and easily to your desired angle in 1° increments

  • Micro Adjust Blade Angle: Fine tune your tilt with the infinitely-adjustable micro adjust

  • T-Style Fence with ErgoLock: Jobsite T-Glide Fence slides smoothly and locks firm with the innovative ErgoLock. T-style design minimizes deflection to increase accuracy. Extend the OnDemand Shelf for support when needed.

  • Fence Storage Holster: Side brackets offer convenient storage for the fence and cord

  • Low-Profile Blade Guard: The Micro Guard increases visibility and protects against kickback with less interference than other guards. Quickly switch between the Micro Guard and the provided riving knife with the flip of a lever

  • Pedal-Activated Folding Stand: Simply push the pedal to release and fold the cart for travel

  • Large Wheels: 8'' wheels are ideal for the varied terrain of most jobsites

  • Control Box: Features the largest Start/Stop paddle in the category and lights to communicate system status. Use the control box to bypass the safety system to test for and/or cut conductive materials

  • Tool-Free Zero-Clearance Insert: Quickly releases with no need for tools.

  • Accessory Storage Drawer: Keep your accessories—your micro guard, riving knife, miter gauge and more—protected and ready at hand with the onboard storage drawer

  • Table Extension Clamp: Locks and unlocks easily, allowing you to quickly extend the table to a full 25-1/2'' rip capacity!

Contractor Saw Features

Technical Data

  • Motor: 1.75 hp, 1 phase, 110 V, 14 A

  • Weight: 365 lbs (table saw only)

  • Max. rip, right of blade: 36"

  • Cabinet footprint: 19 3/8"W x 19 3/8"D

  • Cast iron table: 20"W x 27"D, 44"W x 27"D (w/ extension wings)

  • Stamped steel extension wing: 12"W x 27"D

  • Blade: 40-tooth, professional grade, 5/8" arbor

  • Blade diameter: 10"

  • Blade tilt: Left

  • Blade kerf: 0.118" (3mm)

  • Blade plate thickness: 0.078" (2mm)

  • Max. depth of cut, blade at 0°: 3-1/8"

  • Max. depth of cut, blade at 45°: 2-1/4"

  • Max. rip, left of blade: 12"

  • Dado diameter: 8"

  • Dado max. width: 13/16"

  • Arbor diameter at blade: 5/8"

  • Main bearing size: 62mm OD x 30mm ID

  • Second bearing size: 52mm OD x 25mm ID

  • Table in front of blade (max. elevation): 10-1/4"

  • Table behind blade (max. elevation): 7-1/2"

  • Arbor runout: 0.001" Maximum allowable runout

Model Options

CNS175-SFA30

30” rip capacity & Aluminum Extrusion Fence

58 1/2" w, 40" d, 34 3/4" h

CNS175-TGP36

36” rip capacity & T-Glide Fence Assembly

69 1/8" w, 45" d, 34 3/4" h

CNS175-TGP52

52” rip capacity & T-Glide Fence Assembly

85 1/4" w, 45" d, 34 3/4" h

Contractor Saw Fence Options

  • Blade lateral movement over full elevation range: 0.006" Maximum

  • Table flatness measured diagonally: 0.010" Maximum gap

  • Overall table and extension wing flatness: 0.025" maximum gap

  • Blade alignment with miter slot: 0.010" Maximum displacement

  • Deviation of miter gauge indexing stops from actual: 0.25°

  • Alignment between spreader and blade: 0.010" Maximum difference

  • Miter slots: T-shaped, 3/4" at top, 1" at bottom, 3/8" deep

  • Riving knife / splitter thickness: 0.078" (2mm)

  • Blade guard: polycarbonate, extends only 5/8" to right of blade

  • Insert: zero clearance, steel core, ABS surfaces

  • Hand wheels: 7" diameter, cast iron with chrome handle

  • Belts: 2 V-ribbed belts - arbor belt is static dissipative

  • Brand: SawStop

  • Manufacturer Part Number: CNS175-TGP36

  • Weight (lbs): 650.0000

  • Arbor Size: 5/8"

  • Dust Collection: 4" Port

  • HP: 1-3/4 HP

  • Maximum Depth of Cut: 3-1/8"

  • Height: 34-3/4''

  • Dimensions: 69-1/8'' x 45''

CONNECT WITH US

  • Facebook - Black Circle
  • Instagram - Black Circle
  • Twitter - Black Circle
  • Pinterest - Black Circle
  • YouTube - Black Circle
  • LinkedIn - Black Circle
  • RSS - Black Circle